Operations while Projecting Images
Adjusting the Volume of the Speaker
• Do not increase the volume unless you are listening while increasing the volume. Also, lower
the volume before turning off the power, because a loud sound may be emitted when the
power is turned on and cause hearing damage.
1. Press the [Volume] button.
The value bar appears at the bottom of the screen.
2. Adjust the volume using the [ ] and [ ] buttons.
Press the [ ] button to decrease the volume. Press the [ ] button to increase the volume.
• You can also adjust the volume of the speaker from the control panel on the projector.
Enlarging the Image
Enlarges and displays a part of the image. The image can be enlarged in a range of 100 to 200%.
The enlarged image becomes grainy due to the digital processing.
1. Press the [Magnify] button.
The value bar appears at the bottom of the screen.
2. Projecting an Image
46
To Next Page
Loading...
Need help?
General
