2. To cancel this function, press the [AV Mute] button again.
• An icon appears on the screen when mute is used.
• The mute function is canceled automatically if any button on the control panel is pressed.
• You can also use the [AV Mute] button on the projector's control panel.
Freezing the Image
Freezes the video or moving image that is being projected.
1. Press the [Freeze] button.
The image freezes.
2. To unfreeze the image, press the [Freeze] button again.
• An icon appears on the screen when freeze is used.
• The Freeze function is canceled automatically if any operation is performed.
• When the [Freeze] button is pressed, the image that is being projected at that time is stored in
memory, and that image is projected. Because of this, even though the projector has paused the
image, the equipment continues to play the video.
Specifying the Lamp Settings
Specify the lamp settings to save energy or to make images brighter according to how you use the
projector. You can select the following modes in [Eco Mode]:
On (Auto)
Select this mode to save energy. In this mode, the following settings are automatically specified:
• Lamp Power: [Auto]
• Lamp Pwr on No Signal: [Eco]
• Image Eco: [On]
On (Detailed)
Select this mode to specify [Lamp Power], [Lamp Pwr on No Signal], and [Image Eco] manually.
2. Projecting an Image
48
To Next Page
Loading...
Need help?
General
