Connecting AV Equipment
Use a cable that supports the signal being input when connecting AV equipment.
Using an HDMI cable
Connect an HDMI cable to the HDMI ports of the projector and the AV equipment.
• Some devices may not operate properly when connected using HDMI.
• Use only an HDMI cable that has the HDMI logo. To input 1080p image signals, use a high-speed
HDMI cable. A conventional HDMI cable may not work properly.
Using a video cable
Connect a video cable to the Video In port of the projector and to the video output of AV equipment. To
output audio from the speaker on the projector, connect an audio cable to the Audio In Port of the
projector and to the audio output of AV equipment.
Using a D-sub to component video cable
Connect a D-sub to component video cable to the Computer1 In port of the projector and to the
Y/Pb/Pr output of the AV equipment. To output audio from the speaker on the projector, connect an
audio cable to the Audio In Port of the projector and to the audio output of AV equipment.
Connecting Equipment to the Projector
33
To Next Page
Loading...
Need help?
General
