Wireless LAN (RICOH PJ X3340N/WX3340N/WX4240N only)
Simple Settings
Item Default
Simple Wireless LAN Setup
Acquire the wireless LAN settings registered in the access point, and
specify infrastructure mode wireless LAN settings for the projector
automatically.
This function may not work depending on the access point.
-
Wireless LAN Settings
Item Default
Communication Mode
Select the wireless LAN communication mode.
• Infrastructure
Select this mode when you want to connect the projector to a
wireless LAN network. You need to specify [SSID] and items in
[Security] and [TCP/IP Settings] in this mode.
• Adhoc
Select this mode when you want to connect the projector and
the computer directly. The projector specifies [SSID] and items in
[Security] and [TCP/IP Settings] automatically in this mode.
Adhoc
SSID
Enter the SSID to connect to a wireless LAN network when
[Infrastructure] is selected. Enter up to 32 characters.
(blank)
Channel
Select the channel to use when [Adhoc] is selected.
Select the channel that matches the type of wireless LAN being used.
The channels available might differ depending on the country.
• 2.4 GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
11
5. Changing the Projector Settings
94
To Next Page
Loading...
Need help?
General
