Siemens SINAMICS V20 User Manual

SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012
19
Introduction
2
2.1 Converter variants
The SINAMICS V20 is a range of converters designed for controlling the speed of three
phase asynchronous motors.
Three phase AC 400 V variants
The three phase AC 400 V converters are available in the following frame sizes.
Component
Rated output
power
Rated
input
current
Rated
output
current
Output current
at 480 V at
4kHz/40°C
Article number
unfiltered
filtered
FSA
(without fan)
0.37 kW
1.7 A
1.3 A
1.3 A
6SL3210-5BE13-7UV0
6SL3210-5BE13-7CV0
0.55 kW
2.1 A
1.7 A
1.6 A
6SL3210-5BE15-5UV0
6SL3210-5BE15-5CV0
0.75 kW
2.6 A
2.2 A
2.2 A
6SL3210-5BE17-5UV0
6SL3210-5BE17-5CV0
0.75 kW
1)
2.6 A
2.2 A
2.2 A
-
6SL3216-5BE17-5CV0
FSA
(with single fan)
1.1 kW
4.0 A
3.1 A
3.1 A
6SL3210-5BE21-1UV0
6SL3210-5BE21-1CV0
1.5 kW
5.0 A
4.1 A
4.1 A
6SL3210-5BE21-5UV0
6SL3210-5BE21-5CV0
2.2 kW
6.4 A
5.6 A
4.8 A
6SL3210-5BE22-2UV0
6SL3210-5BE22-2CV0

Siemens SINAMICS V20 Specifications

General

Power Range	0.12 kW to 30 kW
Overload Capacity	150% for 60 seconds
Protection Class	IP20
Storage Temperature Range	-40°C to +70°C
Altitude	Up to 1000 m without derating
Input Voltage	3AC 380 V to 480 V
Output Voltage	0 V to Input Voltage
Control Modes	V/f control
Ambient Temperature Range	-10°C to +60°C
Relative Humidity	5% to 95%, non-condensing
Communication Interfaces	Modbus RTU
Braking Resistor	Optional external