2 Functions
432
7SD5 Manual
C53000-G1176-C169-1
2.24.10 Min/Max Measurement Setup
Minimum and maximum values are calculated by the 7SD5 and can be read out with
the time reference (date and time of the last update).
2.24.10.1 Reset
The minimum and maximum values can be reset, using binary inputs or by using the
integrated control panel in the DIGSI
®
4 operating program. In addition, the reset can
also take place cyclically, beginning with a pre-selected point in time.
2.24.10.2 Settings
2.24.10.3 Information List
Addr. Parameter Setting Options Default Setting Comments
2811 MinMax cycRESET NO
YES
YES Automatic Cyclic Reset Function
2812 MiMa RESET TIME 0 .. 1439 min 0 min MinMax Reset Timer
2813 MiMa RESETCYCLE 1 .. 365 Days 7 Days MinMax Reset Cycle Period
2814 MinMaxRES.START 1 .. 365 Days 1 Days MinMax Start Reset Cycle in
No. Information Type of In-
formation
Comments
- ResMinMax IntSP_Ev Reset Minimum and Maximum counter
395 >I MinMax Reset SP >I MIN/MAX Buffer Reset
396 >I1 MiMaReset SP >I1 MIN/MAX Buffer Reset
397 >U MiMaReset SP >U MIN/MAX Buffer Reset
398 >UphphMiMaRes SP >Uphph MIN/MAX Buffer Reset
399 >U1 MiMa Reset SP >U1 MIN/MAX Buffer Reset
400 >P MiMa Reset SP >P MIN/MAX Buffer Reset
401 >S MiMa Reset SP >S MIN/MAX Buffer Reset
402 >Q MiMa Reset SP >Q MIN/MAX Buffer Reset
403 >Idmd MiMaReset SP >Idmd MIN/MAX Buffer Reset
404 >Pdmd MiMaReset SP >Pdmd MIN/MAX Buffer Reset
405 >Qdmd MiMaReset SP >Qdmd MIN/MAX Buffer Reset
406 >Sdmd MiMaReset SP >Sdmd MIN/MAX Buffer Reset
407 >Frq MiMa Reset SP >Frq. MIN/MAX Buffer Reset
408 >PF MiMaReset SP >Power Factor MIN/MAX Buffer Reset
837 IL1d Min MVT I L1 Demand Minimum
838 IL1d Max MVT I L1 Demand Maximum
839 IL2d Min MVT I L2 Demand Minimum
840 IL2d Max MVT I L2 Demand Maximum
841 IL3d Min MVT I L3 Demand Minimum
842 IL3d Max MVT I L3 Demand Maximum
843 I1dmdMin MVT I1 (positive sequence) Demand Minimum
www . ElectricalPartManuals . com
To Next Page
Loading...
Need help?
General