Siemens siprotec 7SD5 User Manual

A.4 Default Settings
615
7SD5 Manual
C53000-G1176-C169-1
A.4.6 Pre-defined CFC Charts
Some CFC charts are already supplied with the SIPROTEC
®
device. Depending on
the variant the following charts may be implemented:
Device and System
Logic
The NEGATOR block assigns the input signal „DataStop“ directly to an output. This is
not directly possible without the interconnection of this block.
Figure A-22 Logical Link between Input and Output
www . ElectricalPartManuals . com

Siemens siprotec 7SD5 Specifications

General

Brand	Siemens
Model	siprotec 7SD5
Category	Relays
Language	English