Siemens siprotec 7SD5 User Manual

2 Functions
44
7SD5 Manual
C53000-G1176-C169-1
133 Auto Reclose 1 AR-cycle
2 AR-cycles
3 AR-cycles
4 AR-cycles
5 AR-cycles
6 AR-cycles
7 AR-cycles
8 AR-cycles
ADT
Disabled
Disabled Auto-Reclose Function
134 AR control mode Pickup w/ Tact
Pickup w/o Tact
Trip w/ Tact
Trip w/o Tact
Trip w/o Tact Auto-Reclose control mode
135 Synchro-Check Disabled
Enabled
Disabled Synchronism and Voltage Check
136 FREQUENCY Prot. Disabled
Enabled
Disabled Over / Underfrequency Protection
137 U/O VOLTAGE Disabled
Enabled
Enabl. w. comp.
Disabled Under / Overvoltage Protection
138 Fault Locator Disabled
Enabled
with BCD-output
Disabled Fault Locator
139 BREAKER FAILURE Disabled
Enabled
Disabled Breaker Failure Protection
140 Trip Cir. Sup. Disabled
1 trip circuit
2 trip circuits
3 trip circuits
Disabled Trip Circuit Supervision
142 Therm.Overload Disabled
Enabled
Disabled Thermal Overload Protection
143 TRANSFORMER NO
YES
NO Transformer inside protection
zone
144 V-TRANSFORMER Not connected
connected
connected Voltage transformers
145 P. INTERFACE 1 Enabled
Disabled
Enabled Protection Interface 1 (Port D)
146 P. INTERFACE 2 Disabled
Enabled
Disabled Protection Interface 2 (Port E)
147 NUMBER OF RELAY 2 relays
3 relays
4 relays
5 relays
6 relays
2 relays Number of relays
148 GPS-SYNC. Enabled
Disabled
Disabled GPS synchronization
149 charge I comp. Enabled
Disabled
Disabled charging current compensation
160 L-sections FL 1 Section
2 Sections
3 Sections
1 Section Line sections for fault locator
Addr. Parameter Setting Options Default Setting Comments
www . ElectricalPartManuals . com

Siemens siprotec 7SD5 Specifications

General

Brand	Siemens
Model	siprotec 7SD5
Category	Relays
Language	English