WORKSHOP MANUAL
EDITION
PAGE
8 /
124
Each machine has a label (1) which shows the
technical specifications , the model (1a) and the
serial number (1b).
The model and serial number must be shown
when requests are made under Warranty, and are
indispensable for spare part orders.
2.1.1 Machine identification ...................................................................8
2.1.2 Engine identification .....................................................................9
2.1.3 Transmission Unit identification ....................................................9
2.1.4 Versions and equipment ...............................................................9
2.2.1 Preliminary procedures .................................................................9
2.2.2 Tyre pressure check......................................................................10
2.2.3 Battery ..........................................................................................10
2.2.4 Axial steering allowance adjustment ............................................11
2.2.5 Final operations ............................................................................11
2.3.1 Machine transportation .................................................................12
2.3.2 Machine lifting ..............................................................................12
2.4.1 Original spare parts ......................................................................14
2.4.2 Non-original spare parts ...............................................................14
2.5.1 Criteria for maintenance ...............................................................15
2.5.2 Safety measures to be adopted ....................................................15
2.5.3 Tightening torque settings ............................................................15
2.5.4 Routine maintenance schedule ....................................................17
2.5.5 Lubrication ....................................................................................20
2.5.6 Safety devices check ....................................................................20
2.5.7 General checks ............................................................................22
2.6.1 Technical specifications ................................................................24
2.6.2 Overall dimensions .......................................................................26
######
######
######
######
######
To Next Page
Loading...
Need help?
General
