WORKSHOP MANUAL
EDITION
PAGE
95 /
124
5. Refit the filter cap (1).
Screw the two drain plugs (2) and (3) back on,
taking care to always replace the plugs (2) and
(3) if the seals are damaged.
6. Restore the oil level using the quick coupling.
Draining the oil is facilitated if it is carried
out before it cools down completely.
The oil must be drained with the by-pass
open.
1. Unscrew the cap (1) of the oil tank (2).
2. Place a container under the rear transmission
unit and drain all the oil by unscrewing the filter
cap (3).
Unscrew the two drain plugs (4) and (5).
3. Let all the oil flow into the container.
To Next Page
Loading...
Need help?
General
