Tektronix MSO58 Printable Help

Other bus types. Other serial bus types, such as RS232, LIN, I2C, FlexRay, and so on, are available as purchasable options.
Once purchased and installed, the new bus types are shown in the Bus Type menu. The serial bus options also add
corresponding bus trigger capabilities to the Trigger menu.
ARINC 429 serial bus menu on page 192
Audio serial bus configuration menu on page 194
Ethernet serial bus menu on page 198
FlexRay serial bus configuration menu on page 200
I2C serial bus configuration menu on page 202
LIN serial bus configuration menu on page 204
MIL-STD-1553 serial bus menu on page 205
Parallel Bus configuration menu on page 207
RS232 serial bus menu on page 209
SPI serial bus configuration menu on page 213
SPMI serial bus configuration menu on page 215
USB serial bus configuration menu on page 217
See also.
Bus Trigger configuration on page 342
Bus Search configuration menus on page 230
SPI serial bus configuration menu
Use the SPI bus menu (optional) to set up and display an SPI (Serial Peripheral Interface) synchronous serial bus waveform.
To set up the SPI serial bus:
■
To create a new SPI bus waveform, tap the Add New Bus button on the Settings bar. Open the bus configuration menu by
double clicking on the badge. Set the Bus Type to SPI.
■
To change the settings on an existing SPI serial bus waveform, double-tap the Bus waveform badge to open the
configuration menu, and make necessary changes.
Menus and dialog boxes
MSO54, MSO56, MSO58, MSO58LP, MSO64 Help 213

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English