Tektronix MSO58 Printable Help

Change Password configuration menu (optional)
Use this function to change an existing password used to access the optional security functions. This menu is only shown on
instruments with optional security functions installed.
To access the Change Password configuration menu:
1. Tap Utility in the Menu bar
2. Tap Security.
3. Tap Change Password.
Change Password menu fields and controls
3
.
Field or control Description
Current Password Enter the current password in this field.
4
New Password Enter the new password in this field.
6
Repeat New Password Re-enter the new password in this field.
6
Delete Password Deletes the password from the security function. You must enter the correct password before
you can clear it.
If the password is correct, the password is deleted and the menu closes. The Security menu
changes the name of the Delete Password button to Set Password.
If the incorrect password is entered, the instrument shows an error message.
NOTE. Once you delete the password, you must set a new password before you can change
the security access functions.
Set New Password Sets the new password and closes the menu if the current password is correct, the new
password matches in both new password fields, and the new password fields are not empty.
Any other conditions result in an error message.
Cancel Closes the menu without taking any action.
Passwords and sending the instrument for service. If you need to send the instrument for service or repair, make sure to use
the Clear Password function before sending to the Tektronix Service Center. Failure to do so may impede servicing the
instrument.
Demo (Utility menu)
Use this menu to access demonstrations of key oscilloscope features.
To open the Demo configuration menu, select Utility > Demo... in the Menu bar.
3
If the instrument has a keyboard attached, and you have disabled the USB ports, double-tap on the password field to open the virtual keyboard and enter the password.
4
The valid range of characters for the password is from one to 32 characters. Entering no characters or more than 32 characters results in an error message.
Menus and dialog boxes
302 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English