Field or control Description
Sample Rate Tap to set the Sample Rate using the assigned multipurpose knob, double-tap to set the rate
using the virtual keypad, or tap the up and down arrows. This keeps the oscilloscope at the
specified sample rate regardless of the horizontal or record length settings. This limits the
available horizontal scale settings to those that can be used with the specified sample rate.
Only available when Horizontal Mode = Manual.
Record Length Tap to set the Record Length using the assigned multipurpose knob, double-tap to set the
length using the virtual keypad, or tap the up and down arrows.
Only available when Horizontal Mode = Manual.
Math configuration menu overview
Math waveforms are created by combining and/or mathematically transforming source waveforms into a new waveform for
analysis. Use this menu to create math waveforms (basic or advanced) or add an FFT (Fast Fourier Transform) waveform to the
screen.
To access a Math configuration menu, double-tap a Math waveform badge on the Settings bar. If no Math badge is present, tap
the Add New Math button to add a Math waveform and open the configuration menu.
Use the following links to access information on the Math waveform menus and settings.
Math configuration menu on page 310
Equation Editor (Math configuration menu) on page 312
Add Filter menu (math Equation Editor) on page 313
Add Variable menu (math Equation Editor) on page 314
Math configuration menu
Use this menu to set math waveform parameters, create basic and advanced math waveforms, or add an FFT (Fast Fourier
Transformation) plot to analyze frequency components of a waveform.
To access the Math menu, double-tap a Math waveform badge. If no Math badge is present, tap the Add New Math button to
add a math waveform and open the menu.
Menus and dialog boxes
310 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help
To Next Page
Loading...
Need help?
General
