Universal Robots UR10/CB3 User Manual

1.24.36. Command: Variables Initialization
This screen allows setting variable values before the program (and any threads) start executing.
Select a variable from the list of variables by clicking on it, or by using the variable selector box.
For a selected variable, an expression can be entered that will be used to set the variable value
at program start.
If the Keep value from previous run check-box is selected, the variable will be initialized to the
value found on the Variables tab (see1.24.35. Variables Tabon the previous page). This permits
variables to maintain their values between program executions. The variable will get its value
from the expression if the program is run for the first time, or if the value tab has been cleared.
A variable can be deleted from the program by setting its name to blank (only spaces).
User Manual 205 UR10
Copyright © 2009–2020 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR10/CB3 Specifications

General

Brand	Universal Robots
Model	UR10/CB3
Category	Robotics
Language	English