Universal Robots UR10/CB3 User Manual

1.7. Transportation
Transport the robot in the original packaging. Save the packaging material in a dry place; you may
need to pack down and move the robot later on.
Lift both tubes of the robot arm at the same time when moving it from the packaging to the
installation place. Hold the robot in place until all mounting bolts are securely tightened at the
base of the robot.
The controller box shall be lifted by the handle.
WARNING
1. Make sure not to overload your back or other bodyparts when the equipment
is lifted. Use proper lifting equipment. All regional and national guidelines
for lifting shall be followed. Universal Robots cannot be held responsible for
any damage caused by transportation of the equipment.
2. Make sure to mount the robot according to the mounting instructions in
chapter1.8. Mechanical Interface on page23.
User Manual 21 UR10
Copyright © 2009–2020 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR10/CB3 Specifications

General

Brand	Universal Robots
Model	UR10/CB3
Category	Robotics
Language	English