Uponor Smatrix Wave PLUS User Manual

9 Finishing installation
Make a complete check up of the installation:
1. Check that the thermostats are working correctly.
Turn thermostat setpoints to maximum to obtain a
heating demand and make sure that the actuators
are running.
2. Set thermostats and interface (if installed, Wave
PLUS only) to the defined operating settings.
3. Close the covers of the controller.
4. Attach thermostats and interface (if installed, Wave
PLUS only) to the wall.
5. Print and fill in the “Installation report” located at
the end of the manual.
6. Give the manual and all information about the
system to the user.
2
1
1
4
3
5
6
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
51
UPONOR SMATRIX WAVE/WAVE PLUS · INSTALLATION AND OPERATION MANUAL

Uponor Smatrix Wave PLUS Specifications

General

Brand	Uponor
Model	Smatrix Wave PLUS
Category	Floor Heating Systems
Language	English