Uponor Smatrix Wave PLUS User Manual

13.5 Run mode
The timer can show the following information in the
display.
• Clock
• Comfort/ECO mode activated
• Holiday mode
Use the OK button to toggle between the information
available and showing current program setting.
13.6 Forced Comfort/ECO mode
Comfort or ECO mode can temporarily force the system
to switch mode, depending on current mode. Forced
mode will be activated until either switched back
manually or if a scheduled program switches mode.
To activate forced mode:
1. Press any button to activate the display on the
timer.
2. Use the - or + buttons until the icon for Comfort
or ECO mode appears together with the icon for
manual override.
= Manual override
= Comfort mode
= ECO mode
3. Press OK to confirm the change. The overridden
program and remaining time is shown.
4. Press OK again, or wait a couple of seconds to
return to run mode.
13.7 Settings
In this menu all settings regarding the operation of the
timer is set.
NOTE!
If no button is pressed for about 8 seconds,
while in a submenu, the current values will be
saved and the software exits to the settings
menu. About about 60 seconds later, it exits
to run mode.
To enter the settings menu:
1. Press and hold the OK button for about 3 seconds.
2. The settings icon and the numbers 00 is displayed
in the top right corner of the display.
3. Use buttons - or + to change the numbers to locate
a submenu (see list below) and press OK.
00 = Program
01 = Holiday mode
02 = Autobalancing activation
03 = ECO mode setback temperature
08 = Display unit
10 = Time and date
4. Change parameters in the submenus.
5. Press and hold the OK button for about 3 seconds
to exit the settings menu.
00 Program
In this menu, one of seven different scheduling
programs for Comfort/ECO mode can be set.
Program 1 to 6 is pre-programmed and the 7th is user
programmable.
Program Off (default):
Controlled rooms are set in Comfort mode.
Program P1:
Program P2:
Program P3:
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
68
UPONOR SMATRIX WAVE/WAVE PLUS · INSTALLATION AND OPERATION MANUAL

Uponor Smatrix Wave PLUS Specifications

General

Brand	Uponor
Model	Smatrix Wave PLUS
Category	Floor Heating Systems
Language	English