EasyManuals Logo
Home>Uponor>Floor Heating Systems>Smatrix Wave PLUS

Uponor Smatrix Wave PLUS User Manual

Uponor Smatrix Wave PLUS
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
11.2 Adjust temperature
The temperature is changed by adjusting the setpoint
on the thermostat to a value between 5 and 35 ˚C. It
is possible to set minimum and maximum temperature
limits using an interface (Wave PLUS only).
Standard thermostat T-165
Use the dial on the thermostat to adjust the
temperature. A backlight will light up when twisting the
dial. It shuts off after about 10 seconds of inactivity.
The illustration below shows how to adjust the
thermostat temperature setpoint.
To adjust the thermostat temperature setpoint:
Twist the dial clockwise for a higher temperature.
Twist the dial counter-clockwise for a lower
temperature.
Public thermostat T-163
The illustration below shows how to adjust the
thermostat temperature setpoint.
2
1
3
20
5
35
To change the thermostat temperature setpoint:
1. Angle the thermostat from the bracket.
2. Remove it from the wall.
3. Set the desired temperature using the
potentiometer.
4. Put the thermostat back on the wall.
11.3 Disable timer function
Both analogue thermostats have switches on their backs
allowing the user to disable the timer function (Comfort
mode) for the channels controlled by the thermostat.
The switch is set to Comfort/ECO from the factory.
The illustration below shows how to disable the timer
function on the thermostat.
2
1
3
To change the switch to Disable timer:
1. Angle the thermostat from the bracket.
2. Remove it from the wall.
3. Switch to Comfort mode,
.
4. Put the thermostat back on the wall.
11.4 Replace batteries
Replace the batteries of the thermostat when the LED
flashes twice during a heating or cooling demand.
The thermostat will perform a self test, for about
10 seconds, when the batteries have been inserted. The
system will be blocked for input and the thermostat LED
flashes during this period.
The illustration below shows how to change batteries.
2
1
3
1. Angle the thermostat from the bracket.
2. Remove it from the wall.
3. Replace batteries.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
56
UPONOR SMATRIX WAVE/WAVE PLUS · INSTALLATION AND OPERATION MANUAL

Table of Contents

Other manuals for Uponor Smatrix Wave PLUS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uponor Smatrix Wave PLUS and is the answer not in the manual?

Uponor Smatrix Wave PLUS Specifications

General IconGeneral
BrandUponor
ModelSmatrix Wave PLUS
CategoryFloor Heating Systems
LanguageEnglish

Related product manuals