Control Panel Menus
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
159
Maintenance
Use this menu to configure color registration and to reset defaults.
Size Mismatch Specifies the size mismatch setting:
•Off
•Larger Size
•Nearest Size
Startup Page Turns the startup page on or off.
Letterhead 2-Sid Enables or disables the Letterhead 2-Sided mode.
LowToner
AlertMsg
Turns the Low Toner alert message on or off.
Email From Field Enables or disables the Email From Field option.
Server Address
Book
Turns the Server Address Book on or off.
Server Phone
Book
Turns the Server Phone Book on or off.
Power On Wizard Turns the Power On Wizard on or off.
Item Description
F/W Version Displays the latest firmware version.
Auto Regi Adjust Adjusts the color registration automatically. The default setting is On.
Adjust ColorRegi Used to correct the color registration manually. For details, see Color Registration on
page 199.
• Auto Adjust: Correct the color registration.
• Color Regi Chart: Print the correction chart.
• Enter Number: Enter the number to correct the registration.
Initialize NVM Initializes the settings stored in the NVM except for the network settings. The NVM
is a nonvolatile memory that stores the printer settings even after the power is
turned off. After executing this function and restarting the printer, all the menu
settings are reset to their default values.
Note: You cannot execute this setting during printing.
Init Print Meter Initializes the print counts.
Reset Fuser Resets the count for fuser life to 0.
Imaging Unit Refresh Helps improve imaging unit performance by performing a density and color curve
calibration.
Item Description
To Next Page
Loading...
Need help?
General
