Printing
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
89
5. Enter the dimensions of the custom paper size.
6. In the Non-Printable Area drop-down list, select the WorkCentre 6505.
7. Click the OK button to close the Custom Paper Sizes window.
8. Click OK to close the Page Setup window.
Note: To use the custom paper size, select File > Print, and choose the custom size you created
from the Paper Size drop-down list.
Printing on Custom Size Paper
This section includes:
• Printing on Custom Size Paper Using the Windows PostScript Driver on page 89
• Printing on Custom Size Paper Using the Windows PCL Driver on page 89
Note: When setting the paper size in the print driver and control panel, be sure to specify the same
size as the paper in the tray. Setting the wrong size for printing can cause a printer error.
Printing on Custom Size Paper Using the Windows PostScript Driver
1. Load the custom size paper in the tray you want to use. For details, see Loading Paper on page 61.
2. In the application you are printing from, open the Print dialog box and select the
WorkCentre 6505 PS driver.
3. Do one of the following:
• To print using a custom size, in the Print dialog box, select the custom paper size name from
the dialog box size menu or list. Click the Properties button and skip to step 4.
• To print using the Custom Page Size defined in the PostScript driver properties, in the Print
dialog box, click the Properties button. On the Paper/Output tab, select Custom Page Size
from the Paper Size list. In the PostScript Custom Size Settings dialog box, leave the settings
as is or change them to match the paper you are printing on. Click OK.
4. Click on the Paper/Output tab, then do the following:
a. From the Paper Type list, select the paper type.
b. From the Paper Tray list, select the tray to print from.
5. Select any other desired options, then click OK.
6. In the Print dialog box, click OK or Print to start printing.
Printing on Custom Size Paper Using the Windows PCL Driver
1. Load the custom size paper in the tray you want to use. For details, see Loading Paper on page 61.
2. In the application you are printing from, open the Print dialog box and select the
WorkCentre 6505 PCL driver.
3. Click the Properties button.
4. Click the Paper/Output tab, then do the following:
a. From the Paper Size list, select the name of a custom size you created.
b. From the Paper Type list, select the paper type.
c. From the Paper Tray list, select the tray to print from.
To Next Page
Loading...
Need help?
General
