Installation and Setup
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
35
Finding the IP Address of Your Printer
To install the print drivers for a network-connected printer, you need the IP address of your printer. You
also need the IP address to access the settings of your printer through CentreWare Internet Services.
The IP address of your printer appears on the Configuration Page. You can also view it on the printer
control panel.
To print the Configuration Page:
1. On the control panel, press the System button.
2. At Information Pages, press the OK button.
3. Press the Up Arrow or Down Arrow button to select Configuration, then press OK to print the
page.
The IP address of the printer is listed in the Network Setup section of the page.
Note: The first time you turn on your printer, it automatically prints the Startup Page. If the IP
address listed on the page is 0.0.0.0, the printer has not had time to acquire an IP address from
the DHCP server. Wait a minute or two, then print the Startup Page again.
To view the IP address of the printer on the control panel:
1. On the control panel, press the System button.
2. Press the Up Arrow or Down Arrow button to select Admin Menu, then press the OK button.
3. Press the Up Arrow or Down Arrow button to select Network Setup, then press OK.
4. Press the Up Arrow or Down Arrow button to select TCP/IP, then press OK.
5. Press the Up Arrow or Down Arrow button to select IPv4, then press OK.
6. Press the Up Arrow or Down Arrow button to select IP Address, then press OK.
The IP address of the printer appears on the IP Address screen.
Enabling the Printer for Faxing
It is unlawful to send a message from a fax machine without the proper Fax Send Header information.
The following information must appear on the first transmitted page, or in the top or bottom margin of
each transmitted page:
• Identity of the business or individual sending the fax
• Telephone number of the sending machine
• Date and time of the transmission
To set the required Fax Send Header information at the control panel:
1. Press the System button.
2. Press the Up Arrow or Down Arrow button to select Admin Menu, then press the OK button.
3. Press the Up Arrow or Down Arrow button to select Fax Settings, then press OK.
4. Identify the business or individual sending the fax:
a. Press the Up Arrow or Down Arrow button to select Company Name, then press OK.
b. Use the alphanumeric keypad to enter the name of your company, then press OK.
5. Identify the telephone number of the sending machine:
a. Press the Up Arrow or Down Arrow button to select Fax Number, then press OK.
To Next Page
Loading...
Need help?
General
