Printing
WorkCentre 6505 Color Laser Multifunction Printer
User Guide
80
2. Select the WorkCentre 6505 PCL printer from the list of printers, then click the Properties or
Preferences button.
3. Click the Paper/Output tab, then do the following:
a. From the Paper Size list, select the envelope size.
b. From the Paper Type list, select Envelope.
c. From the Paper Tray list, select the tray you are using.
4. Select the Layout tab.
5. From the Fit to New Paper Size list, select the envelope size.
Note: Some applications do not allow you to rotate the image for printing on envelopes the way
they are fed into the printer. Since you cannot change the way the envelope is fed into the printer,
you can use the special rotation setting of the print driver. In the Layout tab, click the
Booklet/Poster/Mixed Document/Rotation button and select Portrait & Landscape [For
envelopes] from the Image Rotation (180 deg) list, then click OK.
6. Click OK.
7. In the Print dialog box, click OK or Print to start printing.
Printing Labels
This section includes:
• Guidelines for Printing Labels on page 80
• Printing Labels from Tray 1 on page 81
• Printing Labels from the Manual Feed Slot on page 81
To order paper or other specialty media, contact your local reseller or go to the Xerox
®
Supplies website
at www.xerox.com/office/WC6505supplies.
Guidelines for Printing Labels
Note: Labels can be printed from Tray 1 and from the manual feed slot.
• Do not use vinyl labels.
• Print only on one side of the sheet of labels. Use full sheet labels only.
CAUTION: Do not use any sheet where labels are missing; it can damage the printer.
• Do not use labels that are perforated, have backing sheets that have partially peeled away or that
have parts of the labels already removed.
• Store unused labels flat in their original packaging. Leave the sheets of labels inside the original
packaging until ready to use. Return any unused sheets of labels to the original packaging and
reseal it.
• Do not store label sheets in extreme conditions of temperature or humidity. Storing them in
extreme conditions can cause print-quality problems or cause them to jam in the printer.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and
jam in the printer.
To Next Page
Loading...
Need help?
General
