Xerox WorkCentre 7225 System Administrator Guide

Initial Setup
16 WorkCentre 7800 Series Multifunction Printer
System Administrator Guide
Physically Connecting the Printer
1. Connect the power cord to the printer, and plug it into an electrical outlet.
2. Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the back of the
printer. Connect the other end of the cable to a correctly configured network port.
3. If your printer has fax installed, connect it to a correctly configured telephone line.
4. Turn on the printer.

Xerox WorkCentre 7225 Specifications

General

Brand	Xerox
Model	WorkCentre 7225
Category	All in One Printer
Language	English