Network Connectivity
WorkCentre 7800 Series Multifunction Printer 51
System Administrator Guide
LDAP
This section includes:
• Adding LDAP Server Information............................................................................................................................... 51
• Adding or Editing LDAP Servers in CentreWare Internet Services ................................................................. 52
• Configuring LDAP Server Optional Information .................................................................................................. 52
• Configuring LDAP Contexts .......................................................................................................................................... 53
• Configuring LDAP User Mappings ............................................................................................................................. 53
•
LDAP Custom Filters ........................................................................................................................................................ 54
Lightweight Directory Access Protocol (LDAP) is a protocol used to process queries and updates to an
LDAP information directory, on an external server. LDAP can also be used for network authentication and
authorization. LDAP directories are heavily optimized for read performance. Use this page to define how
the printer retrieves user information from an LDAP directory.
Adding LDAP Server Information
The LDAP Server page displays the current LDAP servers configured for your printer. You can configure a
maximum of nine LDAP servers for your printer.
1. In CentreWare Internet Services, click Properties > Connectivity > Setup.
2. Under Protocol, next to LDAP, click Edit.
3. Click Add New.
4. Under Server Information, select the preferred address type.
5. Under Friendly Name, type a name for the LDAP server.
6. Type the appropriately formatted address or host name of your server and change the default port
number as needed.
7. Type the appropriately formatted address or host name of your backup server and change the
default port number as needed.
8. Under LDAP Server, select an LDAP server type:
− Exchange for use with Microsoft Exchange.
− Domino for use with Lotus Domino.
− NDS for use with Novell NetWare Directory Service.
− ADS for use with Microsoft Active Directory Service.
− Netscape for use with Netscape or OpenLDAP.
9. Click Apply.
To Next Page
Loading...
Need help?
General
