Faxing
WorkCentre 7800 Series Multifunction Printer 187
System Administrator Guide
Fax Mailboxes
You can store faxes locally in the printer or on a remote fax machine. You can use Remote Polling to
print or access a stored fax. There are 200 available fax mailboxes.
Editing a Fax Mailbox
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Service Settings > Embedded Fax Settings.
3. Touch Mailbox Setup.
4. Touch a mailbox in the Mailbox List, then touch Edit.
5. Touch Mailbox Name, type a name for the mailbox up to 30 characters using the touch screen
keyboard, then touch OK.
6. To assign a passcode to the mailbox, touch Mailbox Passcode, then Passcode Protect. Type a
4-digit passcode using the numeric keypad, then touch OK. Users must type this passcode when
storing faxes to, or printing faxes from, the mailbox.
7. To ensure that the user receives Fax Notifications, touch Enable, then touch OK.
Deleting a Fax Mailbox
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Service Settings > Embedded Fax Settings.
3. Touch the Down arrow to scroll.
4. Touch Mailbox Setup.
5. Touch the assigned mailbox that you want to delete, then touch Delete Mailbox & Contents.
CAUTION: Touching Delete Mailbox deletes the mailbox and all documents it contains.
6. On the Delete Mailbox confirmation screen, to delete the mailbox touch Confirm, or to exit touch
Close.
Fax Reports
You can configure three different reports:
• Activity Report
• Confirmation Report
• Broadcast and Multipoll Report
Setting Up Fax Reports
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Service Settings > Embedded Fax Settings.
3. Touch Setup Fax Reports. Touch the arrows to scroll if necessary.
4. Touch Activity Report, then touch an option:
− Auto Print to always print an activity report.
− Off to never print an activity report.
To Next Page
Loading...
Need help?
General
