Xerox WorkCentre 7225 System Administrator Guide

Security
WorkCentre 7800 Series Multifunction Printer 71
System Administrator Guide
Configuring Authentication Server Settings for LDAP
The printer uses the primary LDAP server for authentication, authorization, and personalization. The
primary LDAP server is the server that appears at the top of the LDAP server list on the LDAP Server
page in CentreWare Internet Services. If you already have configured LDAP server settings, the
printer uses this server automatically when you select LDAP as the network authentication or
authorization method. The printer only uses alternate LDAP servers for authorization and
personalization when primary LDAP server communication fails.
1. On the Login Methods page, next to Authentication Servers, click Edit.
2. Under Authentication Type, select LDAP.
3. Click Add New.
4. Configure LDAP server settings, then click Apply.
Configuring Xerox Secure Access Unified ID System Authentication Settings
When Xerox
®
Secure Access authentication is configured, users swipe a pre-programmed identification
card at the control panel. The printer compares the user credentials to the information stored on the
Xerox
®
Secure Access server. To use Xerox
®
Secure Access, purchase and install the Xerox Secure Access
Unified ID System.
To configure access rights using Xerox Secure Access Unified ID System authentication:
• Install the Xerox
®
Secure Access authentication server software and configure it with user accounts.
For details, see the Xerox Secure Access Unified ID System documentation.
• Enable the Authentication and Accounting Configuration Web service. For details, see HTTP on
page 55.
• Format and configure identification cards.
• Connect your card reader to the USB Port.
• Set the login method to Xerox Secure Access - Unified ID System For details, see Setting the Login
Method on page 67.
• Configure Xerox
®
Secure Access Setup settings.
• Enable the Xerox
®
Secure Access Web service. For details, see HTTP on page 55.
• If you enabled Personalization, configure LDAP server settings. For details, see LDAP server settings
on page 51.
• Configure authorization settings. For details, see Authorization on page 77.
The Login Methods page in CentreWare Internet Services provides links to authentication and
personalization configuration settings.
1. In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.
2. Click Login Methods.

Xerox WorkCentre 7225 Specifications

General

Brand	Xerox
Model	WorkCentre 7225
Category	All in One Printer
Language	English