Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
218
search source list based on the entered string, and display results on the pre-dialing
screen. The user can select the desired entry to dial out quickly. The search source list
can be Local Directory, History, Remote Phone Book and LDAP. The search source list can
be configured using a supplied super search template file (super_search.xml).
You can ask the distributor or Yealink FAE for super search template. You can also obtain
the super search template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage. For more
information on obtaining the super search template, refer to Obtaining Configuration
Files and Resource Files on page 48.
The following table lists meaning of each variable in the super search template file:
Super search list’s root
element
local_directory_search
calllog_search
remote_directory_search
ldap_search
Network_directory_search
The directory list (For
example,
“local_directory_search” for
the local directory list).
Note: Do not edit this field.
Local Contacts
History
Remote Phone Book
LDAP
Network Directories
The display name of the
directory list.
Note: We recommend you do
not edit this field.
1, 2, 3, 4 and 5.
1 is the highest priority, 5
is the lowest.
The priority of the search
results.
0/1,
0: Disabled
1: Enabled
Enable or disable the IP
phone to search the desired
directory list.
Customizing a super search template:
1. Open the template file using an ASCII editor.
2. For each directory list that you want to configure, edit the corresponding string in
the file. For example, configure the local directory list, edit the values within double
quotes in the following strings: