Yealink SIP-T48G Administrator's Guide

Configuring Basic Features
251
3. Enter the waiting time (in seconds) in the Redial Interval field.
4. Enter the desired times in the Redial Times field.
5. Press the Save soft key to accept the change.
Auto answer allows IP phones to automatically answer an incoming call. IP phones will
not automatically answer the incoming call during a call even if auto answer is enabled.
Auto answer is configurable on a per-line basis. Auto-Answer delay defines a period of
delay time before the IP phone automatically answers incoming calls.
Auto Answer Tone
Auto answer tone allows the IP phone to play a tone when an incoming call is
automatically answered. You can customize the auto answer tone or select specialized
tone sets (vary from country to country) for your IP phone. For more information, refer to
Tones on page 671.
Auto Answer Mute
Auto answer mute allows IP phones to mute the local microphone when an incoming
call is automatically answered. It is only applicable to CP860 IP phones.
Note
Procedure
Auto answer can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure auto answer.
Parameter:
account.X.auto_answer
Configure auto answer mute.
Parameter:
account.X.auto_answer_mute_ena
ble
<y0000000000xx>.cfg
Specify a period of delay time for
auto answer.
Parameter:
features.auto_answer_delay
Auto answer is not applicable to automatically answer an IP address call. Automatically
answering an IP address call works only if IP direct auto answer feature is enabled. For
more information, refer to IP Direct Auto Answer on page 257.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm