Configuring Basic Features
273
3. Press or to scroll to the Anonymous Rejection field.
4. Press or to select Enabled from the Anonymous Rejection field.
5. Press or to scroll to the Send Rejection Code field.
6. (Optional.) Press or to select the desired value from the Send Rejection
Code field.
7. (Optional.) Enter the anonymous call rejection on code and off code respectively in
the Reject On Code and Reject Off Code field.
8. Press the Save soft key to accept the change or the Back soft key to cancel.
DND allows IP phones to ignore incoming calls. DND feature can be configured on a
phone or a per-line basis depending on the DND mode. Two DND modes:
Phone (default): DND feature is effective for the IP phone.
Custom: DND feature can be configured for each or all accounts.
A user can activate or deactivate DND using the DND key or DND soft key. The
server-side DND feature disables the local DND and call forward settings. If the
server-side DND feature is enabled on any of the IP phone’s registrations, the other
registrations are not affected. For more information on call forward, refer to Call
Forward on page 305.
The DND on code and DND off code configured on IP phones are used to
activate/deactivate the server-side DND feature. They may vary on different servers.
Return Message When DND
This feature defines the return code and the reason of the SIP response message for the
rejected incoming call when DND is enabled on the IP phone. The caller’s phone LCD
screen displays the received return code.
DND Emergency
This feature allows users to receive the incoming calls from some authorized numbers
even if the DND feature is enabled. This feature is disabled by default.
Procedure
DND can be configured using the configuration files or locally.
Configure DND in the custom
mode.
Parameters:
account.X.dnd.enable
account.X.dnd.on_code
To Next Page
Loading...
Need help?
General
Weight and Dimensions
