Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
222
2. Select the desired value from the pull-down list of Save Call Log.
3. Click Confirm to accept the change.
To configure call log feature via phone user interface:
1. Press Menu->Features->History Setting.
2. Press or , or the Switch soft key to select the desired value from the History
Record field.
3. Press the Save soft key to accept the change.
Call list show number allows the IP phone to show the phone number instead of the
name in the call log list. To use this feature, make sure the save call log feature is
enabled. For more information on save call log, refer to Save Call Log on page 220.
Procedure
Call list show number can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure call list show number.
Parameter:
features.call_log_show_num
Local
Web User Interface
Configure call list show number.
Navigate to:
http://<phoneIPAddress>/servlet

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm