EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
| Basic Settings | 125
Setting the Wallpaper
The VCS devices use the system's built-in wallpaper by default. You can upload the wallpapers to change
the background picture displayed on the screen. If you connect an expanded display, you can also set its
wallpaper.
About this task
Either the smaller or the larger picture will be scaled proportionally to fit the screen. The screen saver
picture format must meet the following:
Format Resolution Single File Size
*.Jpg/*.png/*.bmp/*.jpeg (the
third generation VCS devices
only supports JPG format)
<=2.0 megapixels <=5MB
Note: This feature is only applicable to the third generation VCS devices and VP59. After setting,
the wallpaper is synchronized to the touch panel.
Procedure
1. On your web user interface, go to Setting > Wallpaper & Screensaver.
2. In the the Upload Wallpaper field, select the desired wallpaper.
If you select System Wallpaper, when the screen saver starts, the devices displays the picture of
the screen saver built into the system.
If you select Custom Wallpaper, in the Upload Wallpaper field, click Browse to select a desired
picture, and then click Upload.
3. Hover over the desired wallpaper and select Set as system wallpaper to customize the wallpaper for
your VP59.
4. Hover over the desired wallpaper and select Set as extend display wallpaper to customize the
wallpaper for your expanded display.
5. Click Confirm.
Enabling/Disabling the Clock for the VP59
After you enable the clock, the time and the date are displayed at the center of the Home page.
Procedure
1.
Tap > Settings > Basic > General.
2. Enable/disable Clock.
Setting the Ring Tone for the VP59
You can set the ring tone for VP59, and the ring tone applies to all accounts registered on VP59.
Procedure
1.
Tap > Settings > Basic > General > RingTone.
2. Select the desired ring tone.

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals