EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #239 background imageLoading...
Page #239 background image
| Configuring the Security Features | 239
Managing the Trusted Certificates List
When the system serves as a TLS client and requests a TLS connection with a server, the system
should verify the server certificate sent by the server to decide whether it is trusted based on the trusted
certificates list.
About this task
The trusted certificates list contains the default and the custom certificates.
Default Certificates: The system has built-in trusted certificates.
Custom Certificates: You can upload up to 10 trusted certificates with the size no more than 5M to the
system. The CA certificates supported by the system must be in .pem, .cer, .crt, or .der file format.
Procedure
1. On your web user interface, go to Security > Trusted Certs.
2. Configure and save the following settings:
Parameter Description Configuration Method
Only Accept Trusted
Certificates
Enable or disable the system
only trusting the server
certificates in the trusted
certificates list.
Note: the default value is On.
If it is disabled, the system can
connect to the server no matter
whether the certificate send by
the system is valid or not.
If it is enabled, the system
will authenticate the server
certificate based on the trusted
certificates list. Only when the
authentication succeeds, will the
system trust the server.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Common Name Validation
Enable or disable the system
to mandatorily validate
the CommonName or
SubjectAltName of the server
certificate sent by the server.
This security verification rules
are compliant with RFC 2818.
Note: the default value is Off.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals