EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #135 background imageLoading...
Page #135 background image
| Basic Settings | 135
2. Configure and save the following settings:
Parameter Description Configuration Method
Microphone Mute Mode
Configure the microphone mute
mode.
Synchronized- if you mute/
unmute a microphone, other
microphones will be muted/
unmuted simultaneously.
Separated- if you can
only mute/unmute one
microphones, others does not
respond.
Default: Synchronized.
Web user interface
Note: If you use the remote control or CP960 conference phone to mute/unmute a microphone,
all microphone will be muted/unmuted simultaneously.
Configuring the Keyboard Input Method
You can use the full keyboard on the screen to enter or to edit the data. You can enter characters using the
enabled input method. On-screen keyboard on the monitor supports English and Russian input methods.
This feature is not applicable to VP59.
Procedure
1. On your web user interface, go to Setting > General > General Information > Keyboard IME.
2.
Select the desired list from the Disabled column and click .
The selected input method appears in the Enabled column.
3. Repeat step 2 to add more input methods to the Enabled column.
4.
To remove a input method from the Enabled column, select the desired input method and then click .
5.
To adjust the display order of the enabled input methods, select the desired input method, and click
or .
The input method shown at the top has the highest priority.
Configuring USB Storage
If you have high requirement for data security, you can disable the USB storage. After disabling the feature,
you cannot use the USB flash drive to store recorded videos, screenshots or captured packets.
About this task
This feature is not applicable to the third generation VCS devices running in Yealink Cloud system mode.
Procedure
1. On your web user interface, go to Setting > USB Config.

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals