EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #218 background imageLoading...
Page #218 background image
| Configuring Call Settings | 218
Configuring Ringback Timeout
The ringback timeout defines that if the remote party does not answer your call within specific time, the call
will be hung up automatically.
Procedure
1. On your web user interface, go to Setting > Call Features > Outbound Call Settings.
2. Configure and save the following settings:
Parameter Description Configuration Method
Ringback Timeout(30-240)
Configure the ringback time
(seconds).
Note: the valid value is from 30
to 240 and the default value is
180.
If it is set to 180, the call will
be hung up automatically if the
remote party does not answer
the call within 180s.
Web user interface
Configuring the Auto Refuse Timeout
The auto refuse timeout defines a specific period of time after which the system will stop ringing if the call
is not answered.
Procedure
1. On your web user interface, go to Setting > Call Features > Outbound Call Settings.
2. Configure and save the following settings:
Parameter Description Configuration Method
Auto Refuse Timeout (30-240)
Configure the duration time
(seconds) in the ringing state.
Note: the value is from 30 to
240. The default value is 120.
If it is set to 120, the system
will stop ringing if the call is not
answered within 120s.
Web user interface
Auto Answer
You can allow the system to answer incoming calls automatically in the idle mode or during the call.
Answering a Call Automatically When not in a Call
Answering Multiple Calls Automatically

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals