Yealink VCM38 Administrator's Guide

| Configuration Methods | 54
Using the Virtual Remote Control
Except for the remote control, you can use the virtual remote control on your web user interface to control
your system.
About this task
Note: This feature is not applicable to the third generation VCS devices and VP59.
Procedure
1. On your web user interface, go to Home > Remote Control.
The virtual remote control appears.
2. Click the corresponding keys on the remote control to control the VCS codec.
3. Click Remote Control to close the virtual remote control.
Customizing the Key Type
You can configure the custom key on VCR11 or on VCR20 to the desired functions as needed.
Procedure
1. On your web user interface, go to Setting > Remote Control > Remote Control.

Yealink VCM38 Specifications

General

Type	Conference microphone
Noise reduction	Yes
Microphone frequency	100 - 16000 Hz
Microphone sensitivity	-45 dB
Microphone pick-up range	6 m
Number of microphone arrays	8
Maximum sound pressure level (1kHz)	100 dB
Device interface	RJ-45
Connectivity technology	Wired
Maximum operating distance	40 m
Mounting type	Ceiling
Product color	Silver
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 90 %
Number of products included	1 pc(s)
Harmonized System (HS) code	85181000
Power source	DC/PoE
Sustainability certificates	CE, Federal Communications Commission (FCC), REACH, RoHS

Weight and Dimensions

Width	127.3 mm
Height	66.3 mm