EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
| Configuring Network Settings | 80
Procedure
1. Do one of the following:
On your web user interface, go to Network > LAN Configuration > IPv4/IPv6.
On your VCS: go to More > Settings > Network Setting > Wired Network > IPv4/IPv6.
For VP59, tap > Settings > Network Setting > Wired Network > IPv4/IPv6.
On your CTP20/CTP18, tap > Settings > Network Setting > Host Network > Network > Wired
Network > IPv4/IPv6.
2. Configure and save the following settings:
Parameter Description Configuration Method
Static DNS
Enable or disable DNS feature.
Default: Off.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18
Primary DNS/Pri.DNS
Configure the primary DNS
server assigned to the system.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18
Secondary DNS/Sec.DNS
Configure the secondary DNS
server assigned to the system.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18
Related information
Configuring IPv4 or IPv6
DHCP Options
The DHCP information with labels carries with the corresponding network and other control information.
The information is called option. After connected to the network, the device will broadcast the DISCOVER
request which carries the DHCP options of the network information. The DHCP server will replay the
corresponding option after receiving the request.
Note:
For more information on DHCP options, refer to RFC 2131 or RFC 2132.
Supported DHCP Option of IPv4
DHCP Option 42, Option 2
DHCP Option 12
Supported DHCP Option of IPv4
The following table lists the DHCP options supported by Yealink VCS in IPv4 network.

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals