EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #194 background imageLoading...
Page #194 background image
| Configuring Camera Settings | 194
Parameter Description Configuration Method
Wide Dynamic
Range
Off or Specify the WDR. The value represents
the compression degree of the dynamic range
Cameras with WDR technology can work
perfectly both in the bright and the dark
conditions and present clear images that
balances different lighting, so that you can
identify the details.
Off-do not use WDR.
1~5
Note: For MeetingEye 600/PVT960/VC880/
VC800/VC500/VC200/PVT980/PVT950,
the default value is 2; for MeetingEye 400/
PVT940/VC200-E, the default value is off.
Web user interface
Endpoint
CTP20/CTP18
Photometry
Configure the value of metering.
Average
Central
Bottom
Top
Default: Average.
Web user interface
Endpoint
CTP20/CTP18
Configuring the Mode of WDR-Auto
WDR-auto mode is not applicable to MeetingEye 600/MeetingEye 400/PVT960/PVT940/VC200/VC200-E.
Procedure
1. Do one of the following:
On your web user interface, go to Setting > Camera > Exposure.
For VC880/VC800/VC500/PVT980/PVT950, go to More > Settings > Basic > Camera > Exposure.
On your CTP20/CTP18, tap > Settings > Basic > Camera > Exposure.
2. Select WDR-Auto from the Exposure/Exposure mode drop-down menu.
3. Configure and save the following settings:
Parameter Description Configuration Method
Exposure
Compensation
Configure the value of exposure
compensation.
The exposure compensation is used
to compensate the camera effectively
when the camera is shooting in a backlit
environment. If the environment light is
dark, you can increase the compensation
value.
Note: the valid value is -6 to 6. The
default value is 0.
Web user interface
Endpoint
CTP20/CTP18

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals