EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
| Configuring Network Settings | 84
Parameter Description Configuration Method
VID(1-4094)
Configure the identification of
the Virtual LAN.
Note: the default value is 1. The
value can be any integer from 1
to 4094.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18
Priority
Configure the VLAN priority.
Note: the default value is 0. The
value can be any integer from 0
to 7. The smaller the number is,
the higher the priority is.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18
Configuring DHCP VLAN
Your system supports VLAN discovery via DHCP. When the VLAN discovery method is set to DHCP, the
system will examine DHCP option for a valid VLAN ID. The predefined option 132 is used to supply the
VLAN ID (it should be predefined on the DHCP server first) by default. The administrator can customize the
DHCP option used to request the VLAN ID.
Procedure
1. On your web user interface, go to Network > Advanced > VLAN > DHCP VLAN.
2. Configure and save the following settings:
Parameter Description Configuration Method
Active/STUN Active
Enable or disable the DHCP
VLAN discovery feature on the
system.
Note: the default value is On.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals