EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
| Device Type Licenses and Multipoint Licenses | 56
2. Configure and save the following settings:
Parameter Description Configuration Method
Remote Controller
Disable the remote control.
Note: the default value is On.
If you select Off, you cannot use
the real remote control or the
virtual remote control to control
the system.
Web user interface
Use CP960 Conference Phone
You can use the CP960 conference phone to perform calling and partial configuration tasks. For more
information about how to use CP960 conference phone, refer to Yealink CP960 HD IP Conference Phone
Quick Reference Guide.
Configuring the Operation Modes of Third Generation VCS
By default, you can use the remote control, the touch panel, or the touch screen TV to control the VCS
devices. If you enable Pad Only mode, people in the meeting room cannot control the VCS devices via the
remote control or touch screen TV. They can control the VCS devices via the touch panel only.
Procedure
1. On your web user interface, go to Setting > General > Operation Mode.
2. Configure and save the following settings:
Parameter Description Configuration Method
Operation Mode Select the desired operation
mode.
General Model: you can use
the remote control, touch
panel or touch screen TV to
control the VCS devices.
Pad Only: you can use only
the touch panel to control the
VCS devices.
Default: General Model.
Web user interface
Device Type Licenses and Multipoint Licenses
Licenses
Multipoint Licenses
Importing Device Type License/Multipoint License

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals