EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
| Getting Started | 45
LED Instructions of WPP20 Wireless Presentation Pod
LED Status Description
The WPP20 is starting up.
The WPP20 is trying to pair to the video conferencing system.
The WPP20 is plugged into the video conferencing system, and firmware update is in
progress.
Fast flashing
green
The WPP20 is plugged into the video conferencing system, and the WPP20 is
updating Wi-Fi profile.
Slowly flashing
green
The WPP20 pairs to the video conferencing system successfully, but you are not
sharing content.
The WPP20 pairs to the video conferencing system successfully, and you are sharing
content.
Firmware update is done.
Solid green
Wi-Fi profile update is done.
The WPP20 cannot find or connect to the video conferencing system in 10 seconds
after start-up.
The WPP20 pairs to the video conferencing system successfully, but it does not
detect that the Yealink Wireless Presentation Pod software is running on your PC.
Yealink Wireless Presentation Pod software is turned off.
Firmware update fails.
Slowly flashing
red
Wi-Fi profile update fails.
Powering on and off
Powering on the System
Powering off the System
Powering on or Powering off VP59
Initialization Process Overview
Powering on the System
Your system starts up automatically after you connect an electrical supply. If you power off the system or
the system goes to sleep mode, do the following to power it on.
Procedure
On your VCR11 remote control, press .
For VCR20 Remote Control, press .
Your system is powered on successfully, and the LED indicator glows green.

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals