EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
| Configuring the Audio Settings | 151
2. Configure and save the following settings:
Parameter Description Configuration Method
Media Audio Input
Specify the media audio input
connected to the device.
The supported types are as follows:
Off- not use any media audio
input.
Line Input- the media audio
input device connected to RCA
In port on VC880 or to the Line
In port on VC800.
USB to Line input- the media
audio input device connected
to the USB port on MeetingEye
600/MeetingEye 400/PVT960/
PVT940/VC500/VC200/VC200-E
via a USB to line input adapter.
Default: Disabled.
Web user interface
Endpoint
CTP20
EQ Self Adaption
The EQ self adaption allows the device to optimize the acoustic effect. The EQ self adaption is enabled by
default. System supports manual EQ self adaption adjustment.
When your environment meets the following audio input and output, you can manually trigger the system to
enter the EQ self adaption adjustment in the idle state.
For MeetingEye 600/MeetingEye 400/PVT960/PVT940/VC880/VC800/VC500/PVT980/PVT950:
When the audio output switches to HDMI or Line Output/USB Line output and you connect an audio
input device, click Start EQ Self Adaption to optimize the acoustic effect.
For VP59/VC200/VC200-E:
When the audio output switches to HDMI or Line Output/USB Line output, click Start EQ Self
Adaption to optimize the acoustic effect.
After the factory reset, when you connect a monitor to the system for the first time.
Configuring the EQ Self-adaption
Configuring the EQ Self-adaption
Procedure
1. On your web user interface, go to Setting > Audio > Audio Settings.
2. Configure and save the following settings:
Parameter Description Configuration
Method
EQ Self-Adaption
Enable or disable the EQ self-adaption feature on
the system.
Default: On.
Web user interface

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals