EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #181 background imageLoading...
Page #181 background image
| Configuring Camera Settings | 181
Parameter Description Configuration Method
Resolution Configure the maximum
resolution when the content is
sharing.
1080P
720P
4K—this option appears
only when you enable
4K. It is only applicable to
MeetingEye 600/MeetingEye
400/PVT960/PVT940.
Default: 1080P.
Web user interface
Automatic Content Sharing
(it is not applicable to VP59)
Configure whether to enable
PC presentation on the system
when the content is sharing.
Default: On.
Web user interface
Miracast PIN
(it is only applicable to third
generation VCS devices)
Configure the PIN code for
authentication when using
Miracast presentation.
Note: when using Miracast
presentation, the PIN code will
display in the top-right corner
of the screen. It is enable by
default.
Web user interface
Miracast PIN Validity(30-120s)
(it is only applicable to third
generation VCS devices)
Configure the valid time for
entering PIN code when using
Miracast presentation.
Note: its value is from 30 to
120s and it defaults to 60s. This
parameter is only available when
you enable Miracast PIN.
Web user interface
Configuring Camera Settings
Selecting and Setting Cameras
Viewing Camera Status
Selecting the Camera Mode for MeetingEye 600/MeetingEye 400/PVT960/PVT940
Enabling People Counting for Third Generation VCS Devices
Controlling the Camera
Adjusting the White Balance
Adjusting the Exposure
Displaying Camera Name When Multi-Camera Connected
Adjusting the Display Image of the Camera
Adjusting Hangup Mode and Camera Pan Direction
Configuring Continuous Auto Focus

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals