EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #263 background imageLoading...
Page #263 background image
| System Maintenance | 263
Parameter Description Configuration Method
Syslog Level
Specify the level of syslog
information that displayed in the
syslog.
0-system is unusable
1-action must be taken
immediately
2-critical condition
3-error conditions
4-warning conditions
5-normal but significant
condition
6-informational
Note: the default value is 6.
Higher value indicates more
detailed content.
Web user interface
Syslog Facility
Configure the facility that
generates the log messages.
Default: Local Use 0.
Web user interface
Syslog Prepend Mac
Enable or disable syslog
prepend Mac.
Default: Disabled.
Web user interface
Note:
The severity level of the exported Module Log will not be greater than the Syslog Level. For
example, if you set Syslog Level as 3 and set Talk log Level as 6, the exported Talk log Level will
still be 3. If you set Local Log Level as 5 and set Talk log Level as 4, the exported Talk log Level
will be 4.
Capturing Packets
You can capture packets in three ways: capturing the packets via web user interface, on the remote control
or using the Ethernet software. You can analyze the packet captured for troubleshooting.
Capturing the Packets via Web User Interface
Capturing the Packets via Remote Control
Capturing the Packets via Ethernet Software
Capturing the Packets via Web User Interface
You can capture the packets via the web user interface. You can also download the captured packets to
your computer. The video conferencing system supports the following two modes for capturing packets:
Enhanced: directly exporting the packets file to local PC while capturing.
Normal: manually exporting the packets file to local PC after stopping capturing.
Capturing the Packets in Enhanced Way

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals