EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #191 background imageLoading...
Page #191 background image
| Configuring Camera Settings | 191
Parameter Description Configuration Method
Gain Limit
Specify the value.
Note: the valid value is 1 to 15. For the
second generation VCS devices, the default
value is 4; for the third generation VCS
devices, the default value is 15.
Web user interface
Endpoint
CTP20/CTP18
Wide Dynamic
Range
Off or Specify the WDR. The value
represents the compression degree of the
dynamic range
Cameras with WDR technology can work
perfectly both in the bright and the dark
conditions and present clear images that
balances different lighting, so that you can
identify the details.
Off-do not use WDR.
1~5
Note: For MeetingEye 600/PVT960/
VC880/VC800/VC500/VC200/VC200-E/
PVT980/PVT950, the default value is 2; for
MeetingEye 400/PVT940, the default value
is off.
Web user interface
Endpoint
CTP20/CTP18
Photometry
Configure the value of metering.
Average
Central
Bottom
Top
Default: Average.
Web user interface
Endpoint
CTP20/CTP18
Configuring Aperture Priority
Aperture priority allows you to set a specific aperture value, and then the camera can automatically select
a appropriate shutter speed to match the aperture value via the exposure value measured by the camera
metering system.
About this task
This feature is not applicable to MeetingEye 400/PVT940/VC200/VC200-E.
Procedure
1. Do one of the following:
On your web user interface, go to Setting > Camera > Exposure.
On your VCS: go to More > Settings > Basic > Camera > Exposure.
On your CTP20/CTP18, tap > Settings > Basic > Camera > Exposure.
2. Select Aperture Priority from the Exposure Mode drop-down menu.

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals