Yealink VCM38 Administrator's Guide

| Basic Settings | 128
Hide the IP Address on the Status Bar
Procedure
1. On your web user interface, go to Setting > General > Display.
2. Configure and save the following settings:
Parameter Description Configuration Method
Hide IP Address
Enable or disable the IP address
displayed on the status bar.
• On—do not display the IP
address.
• Off—display the IP address.
Default: Disabled.
Web user interface
Hiding the Time and the Date on the Status Bar
You can hide the time and the date on the status bar of your monitor. This feature is not applicable to VP59.
Procedure
1. On your web user interface, go to Setting > General > Display.
2. Configure and save the following settings:
Parameter Description Configuration Method
Hide Time
Display or hide the time and the
date on the status bar.
• On—do not display the
heading time.
• Off—display the heading
time.
Default: Disabled.
Web user interface

Yealink VCM38 Specifications

General

Type	Conference microphone
Noise reduction	Yes
Microphone frequency	100 - 16000 Hz
Microphone sensitivity	-45 dB
Microphone pick-up range	6 m
Number of microphone arrays	8
Maximum sound pressure level (1kHz)	100 dB
Device interface	RJ-45
Connectivity technology	Wired
Maximum operating distance	40 m
Mounting type	Ceiling
Product color	Silver
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 90 %
Number of products included	1 pc(s)
Harmonized System (HS) code	85181000
Power source	DC/PoE
Sustainability certificates	CE, Federal Communications Commission (FCC), REACH, RoHS

Weight and Dimensions

Width	127.3 mm
Height	66.3 mm