EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #258 background imageLoading...
Page #258 background image
| System Maintenance | 258
Resetting the SD card of VP59
You can reset the SD card (local storage) of VP59 to clear all captured screenshots or recorded videos.
Procedure
1. Do one of the following:
On your web user interface, go to Setting > Upgrade > Reset Built-in SD Card.
For VP59, tap > Settings > Advanced > System Settings > Reboot & Reset > Reset Built-in
Setting Card.
The page prompt whether or not you are sure to reset.
2. Confirm the action.
Resetting the System
Generally, some common issues may occur while using the system. You can reset your system and
camera to factory configurations after you have tried all troubleshooting suggestions.
Resetting the System via Configuration Methods
Resetting the System by using Reset Button
Resetting VP59 by REDIAL key
Resetting the System via Configuration Methods
Procedure
1. Do one of the following:
On your web user interface, go to Setting > Upgrade > Reset to Factory Setting.
On your VCS, go to More > Settings > Advanced > Reboot & Reset > Reset.
For VP59, tap > Settings > Advanced > System Settings > Reboot & Reset > Reset.
On your CTP20/CTP18, tap > Settings > Advanced > System Settings > Reboot & Reset >
Reset.
It prompts whether or not you are sure to reset.
2. Confirm the action.
Resetting the System by using Reset Button
You can use the Reset button to reset the system. No Reset Key on VP59.
Procedure
On your video conferencing system or the VCC22 video conferencing camera, using tiny object (for
example, the paper clip) to press and hold the reset button for 15 seconds until the monitor turns black.

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals