EasyManuals Logo
Home>Yealink>Conference System>VCM38

Yealink VCM38 Administrator's Guide

Yealink VCM38
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
| Configuring Network Settings | 81
Parameter DHCP Options Description
Subnet Mask 1 Specify the subnet mask of the
client.
Time Offset 2 Specify the offset between the
client subnet and the Coordinated
Universal Time (UTC).
Router 3 Specify a list of IP addresses for
routers on the client’s subnet.
Time Server 4 Specify a list of time servers
available to the client.
Domain Name Server 6 Specify a list of domain name
servers available to the client.
Host Name 12 Specify the name of the client.
Domain Server 15 Specify the domain name that
client should use when resolving
hostnames via DNS.
Network Time Protocol Servers 42 Specify the list of NTP server
address available to the client.
Vendor-Specific Information 43
Identify the vendor-specific
information.
Vendor Class Identifier 60
Identify the vendor type.
TFTP Server Name 66 Identify a TFTP server when the
'sname' field in the DHCP header
has been used for DHCP options.
DHCP Option 42, Option 2
Your system can obtain the NTP server address via DHCP.
DHCP option 42 is used to obtain the available NTP server list.
DHCP option 2 is used to specify the offset (seconds) between the system’s subnet and Coordinated
Universal Time (UTC).
Related tasks
Configuring NTP Server
DHCP Option 12
You can specify a hostname for the system. When the system sends the request of DHCP DISCOVER, it
will report the configured host name to the DHCP server via DHCP option 12. See RFC 1035 for character
restrictions.
Configuring the Host Name

Table of Contents

Other manuals for Yealink VCM38

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VCM38 and is the answer not in the manual?

Yealink VCM38 Specifications

General IconGeneral
TypeConference microphone
Noise reductionYes
Microphone frequency100 - 16000 Hz
Microphone sensitivity-45 dB
Microphone pick-up range6 m
Number of microphone arrays8
Maximum sound pressure level (1kHz)100 dB
Device interfaceRJ-45
Connectivity technologyWired
Maximum operating distance40 m
Mounting typeCeiling
Product colorSilver
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 90 %
Number of products included1 pc(s)
Harmonized System (HS) code85181000
Power sourceDC/PoE
Sustainability certificatesCE, Federal Communications Commission (FCC), REACH, RoHS
Weight and Dimensions IconWeight and Dimensions
Width127.3 mm
Height66.3 mm

Related product manuals