Low Voltage Products & Systems 125
ABB Inc. • 888-385-1221 • www.abb-control.com AC 1006.9 - 5/03
Chapter 10 - Functions
10:13 Motor overload protection
Path in menu:
Menu/SETTINGS/Functional Settings/
Protections/Overload
This parameter makes it possible to set the required function of the integrated
motor overload protection. If an overload occurs, the motor stops and a reset is
necessary before a restart is possible.
The motor overload protection has three different modes:
The motor thermal temperature is stored in the event of a power loss.
No
Normal
Dual
The protection is not activated.
The protection is in normal operation.
The protection has two classes, one
during start and another during
Parameter
text
Default
value
Setting
range
Description
Overload Normal
No, Normal,
Dual
Overload
protection
To Next Page
Loading...
Need help?
General
