Low Voltage Products & Systems 63
ABB Inc. • 888-385-1221 • www.abb-control.com AC 1006.9 - 5/03
Chapter 7 - Settings and configuration
7:1 Settings
Settings can be done in two different ways:
• Keypad
• Fieldbus communication
With the keypad, settings can be done as individual parameter settings or by
selecting predefined parameters for different applications.
The unit has one complete set of parameters but some parameters have extra
settings (i.e., sequence start). All default parameters are stored in the unit in
case a full reset to default values is required. When the fieldbus communication
is selected, most parameters can also be modified from this interface.
To Next Page
Loading...
Need help?
General
