Low Voltage Products & Systems 9
ABB Inc. • 888-385-1221 • www.abb-control.com AC 1006.9 - 5/03
Chapter 1 - Introduction
1:1 About the documentation for the softstarter
For the softstarter, the following documents are available:
PST/PSTB Softstarters
Installation and commissioning manual
Document ID: 1SFC132001M0202 (AC1006.9)
Soft Starter Catalog
Document ID: AC1006
For other documents related to the PST Softstarters, see home page
www.abb-control.com/html/products/soft_strs.html
1:2 About the installation and commissioning
manual
This manual contains instructions on how to install and commission the
softstarter. The manual covers procedures for mechanical and electrical
installation and installation of communication devices. It also covers how to
energize, set, configure and verify settings.
For the quickest possible start, read Chapter 2 “ Quickstart” .
1:2.1 Intended audience
1:2.1.1 General
The installation and commissioning manual is intended for personnel
responsible for installing, commissioning and maintaining the softstarter.
1:2.1.2 Requirements
All personnel who interact with the softstarter must have a basic knowledge
in handling electric equipment. The commissioning and maintenance
personnel must be well experienced in using this kind of equipment.
To Next Page
Loading...
Need help?
General
